Corporate Home Open Source Home
Syndicate content
Eucalyptus
Forums » Eucalyptus Community Cloud » Could not start instances with or with more than 2048MB Ram
10 replies [Last post]
Thu, 07/29/2010 - 02:58
muellers-esel
Offline
Joined: 05/17/2010

Hi,

I want to start some m1.xlarge maschine images. It wont work with 2048 MB or more Ram. But there always beeing terminated. Theres nothing loged to nc-log/cc-log.

Thu, 07/29/2010 - 08:03
#1
neil
Offline
Joined: 04/28/2009
Do you have 2048MB or more

Do you have 2048MB or more free on your node? Eucalyptus does not over provision memory.

Thu, 07/29/2010 - 23:49
#2
muellers-esel
Offline
Joined: 05/17/2010
Could not start instances with or with more than 2048MB Ram

neil says... Do you have 2048MB or more free on your node? Eucalyptus does not over provision memory.

Yes this node is a server with 32 Gb Mem.

Mon, 08/02/2010 - 02:47
#3
muellers-esel
Offline
Joined: 05/17/2010
Could not start instances with or with more than 2048MB Ram

I've retested it. If I gave the c1.xlarge instance 2048 MB or more Ram it will not start up. It stays pending and then terminats. If i gave that insance 2040 or lower Ram it starts. What is the problem? Sometimes we need Maschines with a large amount of Ram.

Mon, 08/02/2010 - 04:28
#4
neil
Offline
Joined: 04/28/2009
Have you tried increasing the

Have you tried increasing the memory size for the instance type? (Web UI as admin, configuration tab).

Mon, 08/02/2010 - 04:32
#5
muellers-esel
Offline
Joined: 05/17/2010
Could not start instances with or with more than 2048MB Ram

This is what I did. If I increase size to 2048 or more then the instance would not start.

Thu, 08/05/2010 - 03:09
#6
muellers-esel
Offline
Joined: 05/17/2010
Could not start instances with or with more than 2048MB Ram

He there out,

is there any reason why this happens? And how to fix it?

Sat, 08/07/2010 - 13:22
#7
graziano
Offline
Joined: 01/14/2010
Hello, I assume this not an

Hello,

I assume this not an ECC problem: is that right?

Unless you are using a 32bit or very old distro (both may have issue with the magic 2GB mark) I'm not sure what that can be: can you tell us more about your installation, hardware and distribution?

cheers
graziano

Mon, 08/09/2010 - 00:13
#8
muellers-esel
Offline
Joined: 05/17/2010
Could not start instances with or with more than 2048MB Ram

Hi in my installation I use UEC Version (Ubuntu 10.04) with eucalyptus 1.6.2. It is a 32bit System. Underlaying hardware is a Dell R410 2x 4Core with 32 GB Ram.

Tue, 08/10/2010 - 10:30
#9
graziano
Offline
Joined: 01/14/2010
Hello, I suspect that the

Hello,

I suspect that the 32bit system may be a problem: can you try one node as 64bit installation to see if it solves this problem?

cheers
graziano

Fri, 08/19/2011 - 20:30
#10
jackielegs
Offline
Joined: 08/19/2011
Great

Good post. I’m been looking for topics as interesting as this.
Very informative and information presented very well,
i really liked reading your blog,
thanks for sharing.
bjj gi

Navigation
User login
Active forum topics
more