Corporate Home Open Source Home
Syndicate content
Eucalyptus
Forums » Eucalyptus Community Cloud » Can't ssh to VM instance
14 replies [Last post]
Sat, 07/03/2010 - 06:54
vanvan
Offline
Joined: 05/15/2010

Hi all,
When I ssh to VM instance I alway get connection timed out
anyone has suggestion ?

Mon, 07/05/2010 - 22:28
#1
graziano
Offline
Joined: 01/14/2010
Hello, you are talking of

Hello,

you are talking of instance in the ECC right? Did you euca-authorize port 22 for your security group?

cheers
graziano

Tue, 08/17/2010 - 02:33
#2
kre
Offline
Joined: 12/18/2009
Cannot open SSH connection to VM

I also get a connection timed out error when attempting to log in to a VM instance that I have started in the ECC:

desktop:/vmImages$ ssh -i comkey.private root@173.205.188.136
ssh: connect to host 173.205.188.136 port 22: Connection timed out

At the end of the VM console output, after the key sequences, some error statement seems to be repeated between short intervals:

[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] Command line: root=/dev/sda1 console=ttyS0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable)
[ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] modified: 000000000fff0000 - 0000000010000000 (ACPI data)
[ 0.000000] modified: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000
[ 0.000000] last_map_addr: fff0000 end: fff0000
[ 0.000000] RAMDISK: 0f7a9000 - 0ffeffec
[ 0.000000] ACPI: RSDP 000FBDB0, 0014 (r0 QEMU )
[ 0.000000] ACPI: RSDT 0FFF0000, 0034 (r1 QEMU QEMURSDT 1 QEMU 1)
[ 0.000000] ACPI: FACP 0FFF01B4, 0074 (r1 QEMU QEMUFACP 1 QEMU 1)
[ 0.000000] ACPI: DSDT 0FFF0280, 1DD4 (r1 BXPC BXDSDT 1 INTL 20090521)
[ 0.000000] ACPI: FACS 0FFF0240, 0040
[ 0.000000] ACPI: SSDT 0FFF2054, 09E3 (r1 BXPC BXSSDT 1 INTL 20090521)
[ 0.000000] ACPI: APIC 0FFF2A38, 00EA (r1 QEMU QEMUAPIC 1 QEMU 1)
[ 0.000000] ACPI: HPET 0FFF2B90, 0038 (r1 QEMU QEMUHPET 1 QEMU 1)
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 000fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0]
[ 0.000000] #3 [000f7a9000 - 000ffeffec] RAMDISK ==> [000f7a9000 - 000ffeffec]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fbc90] 000fbc90
[ 0.000000] kvm-clock: cpu 0, msr 0:a6d881, boot clock
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000008
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 16 CPUs, 15 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:effbc000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] kvm-clock: cpu 0, msr 0:1013881, primary cpu clock
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61962
[ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 8192 bytes)
[ 0.000000] Detected 8001.864 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.004000] allocated 2621440 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 234836k/262080k available (4760k kernel code, 492k absent, 26440k reserved, 2540k data, 536k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.004010] Calibrating delay loop (skipped) preset value.. 4000.93 BogoMIPS (lpj=8001864)
[ 0.005268] Security Framework initialized
[ 0.005871] SELinux: Disabled at boot.
[ 0.006476] AppArmor: AppArmor initialized
[ 0.007084] Mount-cache hash table entries: 256
[ 0.008064] Initializing cgroup subsys ns
[ 0.008655] Initializing cgroup subsys cpuacct
[ 0.009327] Initializing cgroup subsys memory
[ 0.009958] Initializing cgroup subsys freezer
[ 0.010642] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.011349] CPU: L2 cache: 2048K
[ 0.011855] SMP alternatives: switching to UP code
[ 0.140391] ACPI: Core revision 20080926
[ 0.141024] ACPI: Checking initramfs for custom DSDT
[ 0.503734] Setting APIC routing to flat
[ 0.505423] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.546471] CPU0: Intel QEMU Virtual CPU version 0.11.0 stepping 03
[ 0.548002] Brought up 1 CPUs
[ 0.548002] Total of 1 processors activated (4000.93 BogoMIPS).
[ 0.548002] net_namespace: 1400 bytes
[ 0.548009] Booting paravirtualized kernel on KVM
[ 0.548982] Time: 9:17:40 Date: 08/17/10
[ 0.549637] regulator: core version 0.5
[ 0.550308] NET: Registered protocol family 16
[ 0.551117] ACPI: bus type pci registered
[ 0.552112] PCI: Using configuration type 1 for base access
[ 0.556368] ACPI: Interpreter enabled
[ 0.556951] ACPI: (supports S0 S3 S4 S5)
[ 0.557661] ACPI: Using IOAPIC for interrupt routing
[ 0.561300] ACPI: No dock devices found.
[ 0.561941] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.564205] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
[ 0.565312] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
[ 0.575324] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.576374] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.577454] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.578525] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.579698] ACPI: WMI: Mapper loaded
[ 0.580506] SCSI subsystem initialized
[ 0.581309] usbcore: registered new interface driver usbfs
[ 0.582213] usbcore: registered new interface driver hub
[ 0.583124] usbcore: registered new device driver usb
[ 0.584204] PCI: Using ACPI for IRQ routing
[ 0.596024] Bluetooth: Core ver 2.13
[ 0.596715] NET: Registered protocol family 31
[ 0.597423] Bluetooth: HCI device and connection manager initialized
[ 0.598416] Bluetooth: HCI socket layer initialized
[ 0.599213] NET: Registered protocol family 8
[ 0.599897] NET: Registered protocol family 20
[ 0.600021] NetLabel: Initializing
[ 0.600698] NetLabel: domain hash size = 128
[ 0.601548] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.602541] NetLabel: unlabeled traffic allowed by default
[ 0.604317] AppArmor: AppArmor Filesystem Enabled
[ 0.616037] pnp: PnP ACPI init
[ 0.616663] ACPI: bus type pnp registered
[ 0.618468] pnp: PnP ACPI: found 6 devices
[ 0.619279] ACPI: ACPI bus type pnp unregistered
[ 0.625091] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.626020] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.627183] NET: Registered protocol family 2
[ 0.664172] IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.665837] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.667403] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.668860] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.670095] TCP reno registered
[ 0.680501] NET: Registered protocol family 1
[ 0.681622] checking if image is initramfs...<4>Clocksource tsc unstable (delta = -456093090 ns)
[ 1.049854] it is
[ 1.455380] Freeing initrd memory: 8475k freed
[ 1.458232] audit: initializing netlink socket (disabled)
[ 1.459147] type=2000 audit(1282036661.456:1): initialized
[ 1.469143] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.471364] VFS: Disk quotas dquot_6.5.1
[ 1.472079] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.473728] fuse init (API version 7.10)
[ 1.474441] msgmni has been set to 475
[ 1.475356] alg: No test for stdrng (krng)
[ 1.476052] io scheduler noop registered
[ 1.476681] io scheduler anticipatory registered
[ 1.477403] io scheduler deadline registered
[ 1.478110] io scheduler cfq registered (default)
[ 1.478861] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.479790] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.480728] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.482531] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.483413] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.484641] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.485860] ACPI: Power Button (FF) [PWRF]
[ 1.486901] processor ACPI_CPU:00: registered as cooling_device0
[ 1.496175] Linux agpgart interface v0.103
[ 1.496850] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.498069] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.499432] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.501571] brd: module loaded
[ 1.502702] loop: module loaded
[ 1.503417] Fixed MDIO Bus: probed
[ 1.504123] PPP generic driver version 2.4.2
[ 1.505010] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 1.506526] Driver 'sd' needs updating - please use bus_type methods
[ 1.507756] Driver 'sr' needs updating - please use bus_type methods
[ 1.509478] scsi0 : ata_piix
[ 1.510157] scsi1 : ata_piix
[ 1.510793] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 1.512114] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 1.824804] ata2.00: ATAPI: QEMU DVD-ROM, 0.11.0, max UDMA/100
[ 1.826471] ata2.00: configured for MWDMA2
[ 1.827621] isa bounce pool size: 16 pages
[ 1.828849] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.11 PQ: 0 ANSI: 5
[ 1.832485] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 1.833480] Uniform CD-ROM driver Revision: 3.20
[ 1.834549] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.836215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.837494] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.838692] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.840166] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.841304] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 1.842963] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.844092] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.845662] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
[ 1.846942] usb usb1: configuration #1 chosen from 1 choice
[ 1.848149] hub 1-0:1.0: USB hub found
[ 1.848990] hub 1-0:1.0: 2 ports detected
[ 1.850031] usbcore: registered new interface driver libusual
[ 1.851249] usbcore: registered new interface driver usbserial
[ 1.852471] USB Serial support registered for generic
[ 1.853536] usbcore: registered new interface driver usbserial_generic
[ 1.854870] usbserial: USB Serial Driver core
[ 1.855789] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.858067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.859096] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.872156] mice: PS/2 mouse device common for all mice
[ 1.896303] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.897616] rtc0: alarms up to one day, 114 bytes nvram
[ 1.898769] device-mapper: uevent: version 1.0.3
[ 1.900202] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.902007] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.903841] device-mapper: multipath: version 1.0.5 loaded
[ 1.904954] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.906430] cpuidle: using governor ladder
[ 1.907248] cpuidle: using governor menu
[ 1.908688] TCP cubic registered
[ 1.909520] NET: Registered protocol family 10
[ 1.911340] lo: Disabled Privacy Extensions
[ 1.912418] NET: Registered protocol family 17
[ 1.913172] Bluetooth: L2CAP ver 2.11
[ 1.913789] Bluetooth: L2CAP socket layer initialized
[ 1.914604] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.915328] Bluetooth: SCO socket layer initialized
[ 1.916179] Bluetooth: RFCOMM socket layer initialized
[ 1.917044] Bluetooth: RFCOMM TTY layer initialized
[ 1.917820] Bluetooth: RFCOMM ver 1.10
[ 1.918591] registered taskstats version 1
[ 1.919378] Magic number: 6:960:272
[ 1.920118] rtc_cmos 00:01: setting system clock to 2010-08-17 09:17:41 UTC (1282036661)
[ 1.921431] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.922393] EDD information not available.
[ 1.923098] Freeing unused kernel memory: 536k freed
[ 1.924180] Write protecting the kernel read-only data: 6708k
Loading, please wait...
Couldnt get a file descriptor referring to the console
Begin: Loading essential drivers... ...
[ 2.185066] md: linear personality registered for level -1
[ 2.187903] md: multipath personality registered for level -4
[ 2.190615] md: raid0 personality registered for level 0
[ 2.194507] md: raid1 personality registered for level 1
[ 2.197045] xor: automatically using best checksumming function: generic_sse
[ 2.216014] generic_sse: 4995.000 MB/sec
[ 2.216834] xor: using function: generic_sse (4995.000 MB/sec)
[ 2.218853] async_tx: api initialized (async)
[ 2.292048] raid6: int64x1 1736 MB/s
[ 2.360040] raid6: int64x2 2464 MB/s
[ 2.428027] raid6: int64x4 1684 MB/s
[ 2.496030] raid6: int64x8 1725 MB/s
[ 2.564039] raid6: sse2x1 3225 MB/s
[ 2.632059] raid6: sse2x2 3758 MB/s
[ 2.700018] raid6: sse2x4 4200 MB/s
[ 2.700632] raid6: using algorithm sse2x4 (4200 MB/s)
[ 2.701417] md: raid6 personality registered for level 6
[ 2.702242] md: raid5 personality registered for level 5
[ 2.703065] md: raid4 personality registered for level 4
[ 2.710080] md: raid10 personality registered for level 10
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
[ 2.772471] FDC 0 is a S82078B
[ 2.787384] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 2.788468] Copyright (c) 1999-2006 Intel Corporation.
[ 2.789628] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 2.790633] e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[ 3.092025] e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) d0:0d:49:22:07:ee
[ 3.205492] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.206616] sym53c8xx 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 3.209448] sym0: <895a> rev 0x0 at pci 0000:00:04.0 irq 11
[ 3.213460] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
[ 3.216014] sym0: SCSI BUS has been reset.
[ 3.227809] scsi2 : sym-2.2.3
[ 3.228939] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 3.229839] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 6.228288] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 0.11 PQ: 0 ANSI: 3
[ 6.229852] scsi target2:0:0: tagged command queuing enabled, command queue depth 16.
[ 6.231368] scsi target2:0:0: Beginning Domain Validation
[ 6.232916] scsi target2:0:0: Domain Validation skipping write tests
[ 6.234135] scsi target2:0:0: Ending Domain Validation
[ 6.239218] sd 2:0:0:0: [sda] 10514432 512-byte hardware sectors: (5.38 GB/5.01 GiB)
[ 6.240833] sd 2:0:0:0: [sda] Write Protect is off
[ 6.241906] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.243841] sd 2:0:0:0: [sda] 10514432 512-byte hardware sectors: (5.38 GB/5.01 GiB)
[ 6.245410] sd 2:0:0:0: [sda] Write Protect is off
[ 6.246476] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.248208] sda: sda1 sda2 sda3
[ 6.251180] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.252174] sd 2:0:0:0: Attached scsi generic sg1 type 0
Done.
Begin: Running /scripts/local-premount ...
Begin: Waiting for resume device... ...
Done.
Done.
[ 11.355538] kjournald starting. Commit interval 5 seconds
[ 11.356637] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Welcome to CentOS release 5.3 (Final)
Press 'I' to enter interactive startup.
Setting clock : Tue Aug 17 09:17:52 EDT 2010 [ OK ]
Starting udev: udevd-event[1137]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:01.1/host0/ioerr_cnt' failed
udevd-event[1138]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:01.1/host1/ioerr_cnt' failed
udevd-event[1142]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:04.0/host2/ioerr_cnt' failed
udevd-event[1640]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:01.1/host1/target1:0:0/ioerr_cnt' failed
udevd-event[1646]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:04.0/host2/target2:0:0/ioerr_cnt' failed
[ OK ]
Setting hostname localhost: [ OK ]
No devices found
Setting up Logical Volume Management: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: mount: wrong fs type, bad option, bad superblock on /dev/sda2,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

[FAILED]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0...cp: cannot stat `/etc/resolv.conf': No such file or directory
done.
[ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Generating SSH1 RSA host key: [ OK ]
Generating SSH2 RSA host key: [ OK ]
Generating SSH2 DSA host key: [ OK ]
Starting sshd: [ OK ]
[ 33.222060] acpiphp_glue: can't get bus number, assuming 0
[ 33.222954] decode_hpp: Could not get hotplug parameters. Use defaults
AUTHORIZED_KEYS:
************************

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCuPXeqkF4MZBJNqYlYDjYJxJV2Z6AfifN+s3f1mqikXAAry4Cb0N3/fE4fBg3MF4y4qKCA7rvMpt92OtH+hTfwx1gYt+vbZLGrcOfrYj0Egg2/m3Qaf+OnJzvDJMKcovjsmfbbC7RDH0bBpLuWnL5ivaRjubawMnSPPwnq9XkbAhNxYRHx5hbFAT64yITMT8/6XGHmZAhlE8BvvtvVESKd3twdp90N+I9upahOUZ2n8ECMh6FCc8K3gzpqP1wLBt+a4ByRFS61L/vwFvBY9S85D329GkdlieKtY87zGQjvqcpITWtWPL8b4bmOiMnNVQhgQdfB1vS5wDUSX9q0+lml kre@eucalyptus

ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDGc9cNORgFsmHz9sVlmWITPFNERANqvGf/qrHuEQleQVZ14YbEVcKQnd72K88nsMDq1idsQlii1ItRwqaadT91+1Agqa2HIQQ3DHRUyhw7GBifwc0i9VxljwJtJ7RwbKoUjWC3PhhX6p7D3UBEuSusMHFV6b6pgQZl1zPkZCEp3XMDljzuQ/OKNQTNtb6cmpq3UvZrXQJ4nB/KZmb8zv8FeDGJUiwkLIrDf8zSr9r1pwhWoYURtN25PXkgzNva1VeyYyfNKbmU3tgWcawDTn7LVG7n2xixaW/ype4ibndJXKhG2RiPBEWBCcLjJLNUa7t0Hz0EPHupknTgdePmwaqf ulteo@eucalyptus
************************
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes
INIT: Id "xvc0" respawning too fast: disabled for 5 minutes

I used the Centos 5.3 image (emi-9ACB1363) registered by admin, but I get the connection timed out error when attempting to log in to instances created from other images as well. I started the VM by running euca-run-instances -t c1.medium -k comkey emi-9ACB1363.

Before attempting to log in, I have run euca-authorize default -p 22 and euca-authorize default -p 80.

Wed, 08/18/2010 - 03:49
#3
kre
Offline
Joined: 12/18/2009
This issue is still

This issue is still preventing me from experimenting with the ECC. I have also tried a 32-bit Fedora 11 disk image, which is the same as the one at the Eucalyptus site except that its size has been doubled. With this image, the VM boots successfully to the login prompt, although some error messages are printed:

[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] Command line: root=/dev/sda1 console=ttyS0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable)
[ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] modified: 000000000fff0000 - 0000000010000000 (ACPI data)
[ 0.000000] modified: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000
[ 0.000000] last_map_addr: fff0000 end: fff0000
[ 0.000000] RAMDISK: 0f7a9000 - 0ffeffec
[ 0.000000] ACPI: RSDP 000FBDB0, 0014 (r0 QEMU )
[ 0.000000] ACPI: RSDT 0FFF0000, 0034 (r1 QEMU QEMURSDT 1 QEMU 1)
[ 0.000000] ACPI: FACP 0FFF01B4, 0074 (r1 QEMU QEMUFACP 1 QEMU 1)
[ 0.000000] ACPI: DSDT 0FFF0280, 1DD4 (r1 BXPC BXDSDT 1 INTL 20090521)
[ 0.000000] ACPI: FACS 0FFF0240, 0040
[ 0.000000] ACPI: SSDT 0FFF2054, 09E3 (r1 BXPC BXSSDT 1 INTL 20090521)
[ 0.000000] ACPI: APIC 0FFF2A38, 00EA (r1 QEMU QEMUAPIC 1 QEMU 1)
[ 0.000000] ACPI: HPET 0FFF2B90, 0038 (r1 QEMU QEMUHPET 1 QEMU 1)
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 000fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0]
[ 0.000000] #3 [000f7a9000 - 000ffeffec] RAMDISK ==> [000f7a9000 - 000ffeffec]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fbc90] 000fbc90
[ 0.000000] kvm-clock: cpu 0, msr 0:a6d881, boot clock
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000008
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 16 CPUs, 15 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:effbc000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] kvm-clock: cpu 0, msr 0:1013881, primary cpu clock
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61962
[ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 8192 bytes)
[ 0.000000] Detected 8001.864 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.004000] allocated 2621440 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 234836k/262080k available (4760k kernel code, 492k absent, 26440k reserved, 2540k data, 536k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.004010] Calibrating delay loop (skipped) preset value.. 4000.93 BogoMIPS (lpj=8001864)
[ 0.005253] Security Framework initialized
[ 0.005851] SELinux: Disabled at boot.
[ 0.006452] AppArmor: AppArmor initialized
[ 0.007054] Mount-cache hash table entries: 256
[ 0.008026] Initializing cgroup subsys ns
[ 0.008616] Initializing cgroup subsys cpuacct
[ 0.009259] Initializing cgroup subsys memory
[ 0.009889] Initializing cgroup subsys freezer
[ 0.010572] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.011271] CPU: L2 cache: 2048K
[ 0.011862] SMP alternatives: switching to UP code
[ 0.132388] ACPI: Core revision 20080926
[ 0.133022] ACPI: Checking initramfs for custom DSDT
[ 0.517510] Setting APIC routing to flat
[ 0.519580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.560240] CPU0: Intel QEMU Virtual CPU version 0.11.0 stepping 03
[ 0.564002] Brought up 1 CPUs
[ 0.564002] Total of 1 processors activated (4000.93 BogoMIPS).
[ 0.564002] net_namespace: 1400 bytes
[ 0.564010] Booting paravirtualized kernel on KVM
[ 0.564984] Time: 10:54:46 Date: 08/18/10
[ 0.565630] regulator: core version 0.5
[ 0.566278] NET: Registered protocol family 16
[ 0.567081] ACPI: bus type pci registered
[ 0.568112] PCI: Using configuration type 1 for base access
[ 0.572360] ACPI: Interpreter enabled
[ 0.572934] ACPI: (supports S0 S3 S4 S5)
[ 0.573634] ACPI: Using IOAPIC for interrupt routing
[ 0.577299] ACPI: No dock devices found.
[ 0.577936] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.580191] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
[ 0.581281] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
[ 0.590961] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.592159] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.593244] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.594326] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.595499] ACPI: WMI: Mapper loaded
[ 0.596514] SCSI subsystem initialized
[ 0.597313] usbcore: registered new interface driver usbfs
[ 0.598211] usbcore: registered new interface driver hub
[ 0.599121] usbcore: registered new device driver usb
[ 0.600206] PCI: Using ACPI for IRQ routing
[ 0.612026] Bluetooth: Core ver 2.13
[ 0.612857] NET: Registered protocol family 31
[ 0.613730] Bluetooth: HCI device and connection manager initialized
[ 0.615051] Bluetooth: HCI socket layer initialized
[ 0.616005] NET: Registered protocol family 8
[ 0.616843] NET: Registered protocol family 20
[ 0.617710] NetLabel: Initializing
[ 0.618376] NetLabel: domain hash size = 128
[ 0.619212] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.620031] NetLabel: unlabeled traffic allowed by default
[ 0.621428] AppArmor: AppArmor Filesystem Enabled
[ 0.632037] pnp: PnP ACPI init
[ 0.632662] ACPI: bus type pnp registered
[ 0.634495] pnp: PnP ACPI: found 6 devices
[ 0.635333] ACPI: ACPI bus type pnp unregistered
[ 0.641139] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.642058] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.643217] NET: Registered protocol family 2
[ 0.680173] IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.681829] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.683366] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.684892] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.686126] TCP reno registered
[ 0.696392] NET: Registered protocol family 1
[ 0.697499] checking if image is initramfs...<4>Clocksource tsc unstable (delta = -456095208 ns)
[ 1.066593] it is
[ 1.474913] Freeing initrd memory: 8475k freed
[ 1.477830] audit: initializing netlink socket (disabled)
[ 1.478731] type=2000 audit(1282128888.476:1): initialized
[ 1.489002] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.491221] VFS: Disk quotas dquot_6.5.1
[ 1.491914] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.493581] fuse init (API version 7.10)
[ 1.494310] msgmni has been set to 475
[ 1.495229] alg: No test for stdrng (krng)
[ 1.495895] io scheduler noop registered
[ 1.496600] io scheduler anticipatory registered
[ 1.497324] io scheduler deadline registered
[ 1.498028] io scheduler cfq registered (default)
[ 1.498776] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.499704] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.500626] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.502437] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.503320] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.504648] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.505865] ACPI: Power Button (FF) [PWRF]
[ 1.506980] processor ACPI_CPU:00: registered as cooling_device0
[ 1.516292] Linux agpgart interface v0.103
[ 1.516971] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.518193] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.519564] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.521373] brd: module loaded
[ 1.522296] loop: module loaded
[ 1.522874] Fixed MDIO Bus: probed
[ 1.523423] PPP generic driver version 2.4.2
[ 1.524176] input: Macintosh mouse button emulation as /devices/virtual/input/input1
[ 1.525386] Driver 'sd' needs updating - please use bus_type methods
[ 1.526367] Driver 'sr' needs updating - please use bus_type methods
[ 1.527743] scsi0 : ata_piix
[ 1.528316] scsi1 : ata_piix
[ 1.528826] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 1.529881] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 1.840821] ata2.00: ATAPI: QEMU DVD-ROM, 0.11.0, max UDMA/100
[ 1.842496] ata2.00: configured for MWDMA2
[ 1.843631] isa bounce pool size: 16 pages
[ 1.844945] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.11 PQ: 0 ANSI: 5
[ 1.848538] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 1.849531] Uniform CD-ROM driver Revision: 3.20
[ 1.850588] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.852225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.853493] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.854692] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.856233] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.857361] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 1.859012] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.860138] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.861691] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
[ 1.862953] usb usb1: configuration #1 chosen from 1 choice
[ 1.864133] hub 1-0:1.0: USB hub found
[ 1.864907] hub 1-0:1.0: 2 ports detected
[ 1.865787] usbcore: registered new interface driver libusual
[ 1.866823] usbcore: registered new interface driver usbserial
[ 1.867758] USB Serial support registered for generic
[ 1.868604] usbcore: registered new interface driver usbserial_generic
[ 1.869650] usbserial: USB Serial Driver core
[ 1.870384] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.872369] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.873185] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.884176] mice: PS/2 mouse device common for all mice
[ 1.908199] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.909350] rtc0: alarms up to one day, 114 bytes nvram
[ 1.910317] device-mapper: uevent: version 1.0.3
[ 1.911509] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.913068] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.914968] device-mapper: multipath: version 1.0.5 loaded
[ 1.916073] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.917516] cpuidle: using governor ladder
[ 1.918348] cpuidle: using governor menu
[ 1.919800] TCP cubic registered
[ 1.920720] NET: Registered protocol family 10
[ 1.922539] lo: Disabled Privacy Extensions
[ 1.923833] NET: Registered protocol family 17
[ 1.924651] Bluetooth: L2CAP ver 2.11
[ 1.925270] Bluetooth: L2CAP socket layer initialized
[ 1.926092] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.926870] Bluetooth: SCO socket layer initialized
[ 1.927720] Bluetooth: RFCOMM socket layer initialized
[ 1.928589] Bluetooth: RFCOMM TTY layer initialized
[ 1.929370] Bluetooth: RFCOMM ver 1.10
[ 1.930137] registered taskstats version 1
[ 1.930906] Magic number: 6:315:932
[ 1.931691] rtc_cmos 00:01: setting system clock to 2010-08-18 10:54:47 UTC (1282128887)
[ 1.933044] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.934025] EDD information not available.
[ 1.934838] Freeing unused kernel memory: 536k freed
[ 1.935879] Write protecting the kernel read-only data: 6708k
Loading, please wait...
Couldnt get a file descriptor referring to the console
Begin: Loading essential drivers... ...
[ 2.197398] md: linear personality registered for level -1
[ 2.200246] md: multipath personality registered for level -4
[ 2.202894] md: raid0 personality registered for level 0
[ 2.206746] md: raid1 personality registered for level 1
[ 2.209177] xor: automatically using best checksumming function: generic_sse
[ 2.228019] generic_sse: 4990.000 MB/sec
[ 2.228718] xor: using function: generic_sse (4990.000 MB/sec)
[ 2.230724] async_tx: api initialized (async)
[ 2.304032] raid6: int64x1 1798 MB/s
[ 2.372024] raid6: int64x2 2413 MB/s
[ 2.440050] raid6: int64x4 1677 MB/s
[ 2.508056] raid6: int64x8 1722 MB/s
[ 2.576035] raid6: sse2x1 3206 MB/s
[ 2.644029] raid6: sse2x2 3752 MB/s
[ 2.712018] raid6: sse2x4 4146 MB/s
[ 2.715177] raid6: using algorithm sse2x4 (4146 MB/s)
[ 2.715960] md: raid6 personality registered for level 6
[ 2.716810] md: raid5 personality registered for level 5
[ 2.717629] md: raid4 personality registered for level 4
[ 2.724805] md: raid10 personality registered for level 10
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
[ 2.788390] FDC 0 is a S82078B
[ 2.802742] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 2.803815] Copyright (c) 1999-2006 Intel Corporation.
[ 2.805121] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 2.806188] e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[ 3.108328] e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) d0:0d:3d:0f:06:eb
[ 3.149795] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.150961] sym53c8xx 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 3.154163] sym0: <895a> rev 0x0 at pci 0000:00:04.0 irq 11
[ 3.159956] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
[ 3.164894] sym0: SCSI BUS has been reset.
[ 3.174375] scsi2 : sym-2.2.3
[ 3.178975] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 3.179871] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 6.180195] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 0.11 PQ: 0 ANSI: 3
[ 6.181743] scsi target2:0:0: tagged command queuing enabled, command queue depth 16.
[ 6.183240] scsi target2:0:0: Beginning Domain Validation
[ 6.184869] scsi target2:0:0: Domain Validation skipping write tests
[ 6.186103] scsi target2:0:0: Ending Domain Validation
[ 6.191341] sd 2:0:0:0: [sda] 10567680 512-byte hardware sectors: (5.41 GB/5.03 GiB)
[ 6.192926] sd 2:0:0:0: [sda] Write Protect is off
[ 6.194145] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.196097] sd 2:0:0:0: [sda] 10567680 512-byte hardware sectors: (5.41 GB/5.03 GiB)
[ 6.197625] sd 2:0:0:0: [sda] Write Protect is off
[ 6.198676] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.200389] sda: sda1 sda2 sda3
[ 6.203387] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.204399] sd 2:0:0:0: Attached scsi generic sg1 type 0
Done.
Begin: Running /scripts/local-premount ...
Begin: Waiting for resume device... ...
Done.
Done.
[ 11.362414] kjournald starting. Commit interval 5 seconds
[ 11.363502] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: /bin/mknod: `/dev/loop0': File exists
/bin/mknod: `/dev/loop1': File exists
/bin/mknod: `/dev/loop2': File exists
/bin/mknod: `/dev/loop3': File exists
/bin/mknod: `/dev/loop4': File exists
/bin/mknod: `/dev/loop5': File exists
/bin/mknod: `/dev/loop6': File exists
/bin/mknod: `/dev/loop7': File exists
/bin/mknod: `/dev/ppp': File exists
[ OK ]
Setting hostname localhost: [ OK ]
Setting up Logical Volume Management: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 20406/131072 files, 156257/524288 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: mount: wrong fs type, bad option, bad superblock on /dev/sda2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
[FAILED]
Enabling /etc/fstab swaps: [ OK ]
modprobe: FATAL: Could not load /lib/modules/2.6.28-11-generic/modules.dep: No such file or directory
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... done.
[ OK ]
Starting system logger: [ OK ]
Adding udev persistent rules[ OK ]
Adding udev persistent rules[ OK ]
Starting sshd: [ OK ]
Starting exim: [ OK ]
[ OK ] crond: [ OK ]
WARNING: Couldn't open directory /lib/modules/2.6.28-11-generic: No such file or directory
FATAL: Could not open /lib/modules/2.6.28-11-generic/modules.dep.temp for writing: No such file or directory
FATAL: Could not load /lib/modules/2.6.28-11-generic/modules.dep: No such file or directory
AUTHORIZED_KEYS:
************************
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCuPXeqkF4MZBJNqYlYDjYJxJV2Z6AfifN+s3f1mqikXAAry4Cb0N3/fE4fBg3MF4y4qKCA7rvMpt92OtH+hTfwx1gYt+vbZLGrcOfrYj0Egg2/m3Qaf+OnJzvDJMKcovjsmfbbC7RDH0bBpLuWnL5ivaRjubawMnSPPwnq9XkbAhNxYRHx5hbFAT64yITMT8/6XGHmZAhlE8BvvtvVESKd3twdp90N+I9upahOUZ2n8ECMh6FCc8K3gzpqP1wLBt+a4ByRFS61L/vwFvBY9S85D329GkdlieKtY87zGQjvqcpITWtWPL8b4bmOiMnNVQhgQdfB1vS5wDUSX9q0+lml kre@eucalyptus
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCuPXeqkF4MZBJNqYlYDjYJxJV2Z6AfifN+s3f1mqikXAAry4Cb0N3/fE4fBg3MF4y4qKCA7rvMpt92OtH+hTfwx1gYt+vbZLGrcOfrYj0Egg2/m3Qaf+OnJzvDJMKcovjsmfbbC7RDH0bBpLuWnL5ivaRjubawMnSPPwnq9XkbAhNxYRHx5hbFAT64yITMT8/6XGHmZAhlE8BvvtvVESKd3twdp90N+I9upahOUZ2n8ECMh6FCc8K3gzpqP1wLBt+a4ByRFS61L/vwFvBY9S85D329GkdlieKtY87zGQjvqcpITWtWPL8b4bmOiMnNVQhgQdfB1vS5wDUSX9q0+lml kre@eucalyptus
************************
Fedora release 11 (Leonidas)
Kernel 2.6.28-11-generic on an x86_64 (/dev/ttyS0)
localhost login:

However, when I attempt to SSH to the instance I get the same connection timed out error. Also pinging the IP address of the instance fails with a 100% packet loss. Could anyone please suggest what could be causing this problem?

I am wondering if the default ram disk and kernel images should work with all custom disk images, such as the 32-bit Fedora disk image?

Tue, 08/31/2010 - 14:09
#4
graziano
Offline
Joined: 01/14/2010
Hello, what does

Hello,

what does euca-describe-groups returns? Did you enable ssh?

cheers
graziano

Wed, 09/01/2010 - 22:18
#5
kre
Offline
Joined: 12/18/2009
Hello, here is the output

Hello,

here is the output from euca-describe-groups: GROUP kre default default group.

I have run euca-authorize default -p 22 and euca-authorize default -p 80. In addition, the output from euca-get-console-output command contains the line Starting sshd: [ OK ], so I think SSH should be enabled.

However, right now I cannot get the 32-bit Fedora images to boot to the login prompt. It seems that the instances cannot find their root file systems, and they drop to a shell. The 64-bit Centos-image starts printing the line INIT: Id "xvc0" respawning too fast: disabled for 5 minutes after start-up, and the console output does not contain the login prompt. Perhaps this is preventing SSH connections?

Thank you.

Wed, 09/01/2010 - 23:22
#6
graziano
Offline
Joined: 01/14/2010
Hello, if what you posted is

Hello,

if what you posted is the output of euca-describe-groups, you don't have any rules to allow any connection to be made to the instance. Please refer to our user's guide for instructions on how to do so (in short you need to use euca-authorize -P tcp -p 22 -s 0.0.0.0/0 default).

You can ignore the xvc0 respawing error: it's harmless.

cheers
graziano

Thu, 09/02/2010 - 00:46
#7
kre
Offline
Joined: 12/18/2009
Hello, Thank you for your

Hello,

Thank you for your reply. I have now added rules to allow TCP and ICMP protocols. Here is the new output from euca-describe-groups:

$ euca-describe-groups
GROUP kre default default group
PERMISSION kre default ALLOWS tcp 22 22 FROM CIDR 0.0.0.0/0
PERMISSION kre default ALLOWS icmp 22 22 FROM CIDR 0.0.0.0/0
PERMISSION kre default ALLOWS icmp 0 0 FROM CIDR 0.0.0.0/0
PERMISSION kre default ALLOWS icmp -1 -1 FROM CIDR 0.0.0.0/0

However, now I get a different error message when attempting to open an SSH connection to the instance:

$ ssh -i comkey.ppk -v root@173.205.188.152OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 173.205.188.152 [173.205.188.152] port 22.
debug1: connect to address 173.205.188.152 port 22: No route to host
ssh: connect to host 173.205.188.152 port 22: No route to host

Also pinging the instance seems to fail:

$ ping -c 3 173.205.188.152
PING 173.205.188.152 (173.205.188.152) 56(84) bytes of data.
From 173.205.188.152 icmp_seq=1 Destination Host Unreachable
From 173.205.188.152 icmp_seq=2 Destination Host Unreachable
From 173.205.188.152 icmp_seq=3 Destination Host Unreachable

--- 173.205.188.152 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2016ms
, pipe 3

I think the current authorization rules should allow both SSH connections and pinging. Could someone suggest why they are still failing? Thank you.

Thu, 09/02/2010 - 22:55
#8
graziano
Offline
Joined: 01/14/2010
Hello, I'm not quite sure

Hello,

I'm not quite sure what happened there: I noticed your instance not been responsive and we are investigating. Can you try again and let us know if you see issues?

cheers
graziano

Fri, 09/03/2010 - 05:42
#9
kre
Offline
Joined: 12/18/2009
Hello, now I am able to ping

Hello,

now I am able to ping the instance; all packets are received. However, I cannot log in to the instance. It seems that the instance does not accept the key and requires a password instead:

$ ssh -v -i comkey.ppk root@173.205.188.131
OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 173.205.188.131 [173.205.188.131] port 22.
debug1: Connection established.
debug1: identity file comkey.ppk type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH_4*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu4
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host '173.205.188.131' is known and matches the RSA host key.
debug1: Found key in /home/jputtonen/.ssh/known_hosts:1
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: gssapi-with-mic
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
debug1: Next authentication method: publickey
debug1: Trying private key: comkey.ppk
debug1: read PEM private key done: type RSA
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: password
root@173.205.188.131's password:

I started the instance with the command euca-run-instances -k comkey -t c1.medium emi-9ACB1363, so I think the key file that I specified in the ssh options should be the correct one. Thank you.

Fri, 09/03/2010 - 07:33
#10
graziano
Offline
Joined: 01/14/2010
Hello, I'm not seeing

Hello,

I'm not seeing anything unsual from this side, so I have to assume that, for whatever reason, there is some issue with your private key. Can you try to recreate a keypair and try again?

cheers
graziano

Tue, 09/07/2010 - 22:08
#11
kre
Offline
Joined: 12/18/2009
Hello, I have now managed to

Hello,

I have now managed to start a new instance and log in to it using a new keypair. Thank you.

Mon, 12/13/2010 - 05:55
#12
snehalmasne
Offline
Joined: 10/04/2010
Unable to connect running Instance

I too got the same problem..

unable to connect/ timed out... [ssh root@172.19.1.2]

even I tried : euca-authorize -P tcp -p 22 -s 0.0.0.0/0 default

still not wokring.. please any help.. thanks in advance :)

regards,
www.TechProceed.com

Mon, 12/13/2010 - 10:22
#13
graziano
Offline
Joined: 01/14/2010
Hello, are you having this

Hello,

are you having this issues on instances running on the ECC? Which image are you using?

cheers
graziano

Mon, 09/26/2011 - 15:18
#14
malaika
Offline
Joined: 03/27/2011
Hi, I'm facing the same

Hi,

I'm facing the same problem. I have already done most of what's mentioned in this post. I can ping the VM, I also can see that port 22 is opened using Nmap. I've added the group permission. And my euca-describe-groups shows:

$ euca-describe-groups
PERMISSION admin default ALLOWS tcp 22 22 FROM CIDR 0.0.0.0/0

And I have created 3 private keys.

When I try to SSH this is what I get:

$ ssh -v -i keyp.pem root@192.168.0.123
OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.0.123 [192.168.0.123] port 22.
debug1: Connection established.
debug1: identity file keyp.pem type -1
debug1: identity file keyp.pem-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian-3ubuntu3
debug1: match: OpenSSH_5.3p1 Debian-3ubuntu3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-1ubuntu3
debug1: SSH2_MSG_KEXINIT sent
Read from socket failed: Connection reset by peer

I did ssh -v -i keyp.pem admin@192.168.0.123 and ssh -v -i keyp.pem 192.168.0.123 but getting the same error.

Any idea what I'm missing?

Thanks

Navigation
User login
Active forum topics
more